years
INDUSTRIES
Typical applications
Commercial Buildings
Healthcare
Schools and Universities
Manufacturing
Sturdy Construction and Dependability
The VariCel RF filter, with its galvanized steel cell sides and plastic pleat spacers on the air-entering and air-leaving sides, withstands the most demanding applications. The pleat spacers and expanded metal support grid maintain the shape of the synthetic media pack and ensure that both efficiency and dust holding capacity are maximized.
Supported Pleat Media Pack
The rigid construction with supported pleat media pack maintains a compact unitized structure under variable air velocities and repeated fan shutdowns. The interlocked header and cell sides, along the entire length of each side, provide maximum sealing. Competitive filters are designed with loose fitting headers that allow greater potential for bypass leakage.
Layered Synthetic Media Pack
The layered media used in the VariCel RF filter is a meltblown synthetic protected by a scrim on the air-leaving side. Layering the media provides both a high-efficiency final filter layer that effectively filters fine particulate, and an integral lofted prefilter layer that captures larger particulate. Meltblown synthetic media is stronger than fiberglass, and is non-shedding and water-resistant.
Open Header Design
AAF Flanders’ unique open header design creates a built-in handle that makes carrying and installing the VariCel RF filter easy. As an added safety measure, we roll the edges of the header to eliminate sharp edges that can make handling competitors’ products hazardous.
| EN779 | M6 – F8 |
| ASHRAE 52.2 | MERV 11 – 14 |
| Media Type | Synthetic |
| Frame Material | Galvanised Steel, Plastic (None Header) |
| Special Size Available | Yes |
| Antimicrobial Available | Optional |
| Header Type (Standard) | Single, None Header (GI), None (Plastic) |
| Header Type (Optional) | Double |
| Recomm. Final Resistance | 450 Pa |
| Max. Operating Temperature | 93˚C |
or
Enquire Now
Related products
VariCel 2+ HC
- AAF’s Impress® pleating technology for maximized energy efficiency
- Combines high mechanical strength and low resistance for savings on overall operating costs
- Excellent performance under difficult conditions, including variable air volume, turbulent airflow, and high humidity
- Impress® technology maximizes media utilization for increased Dust Holding Capacity (DHC) and longer service life
- High capacity media pack provides lowest possible total cost of ownership with lower resistance and longer filter life
- Lightweight and easy to handle and install
- Slim-line design significantly reduces shipping, storage, and disposal cost
- Models rated MERV 13 and higher meet LEED® Project Certification efficiency requirements
VariCel M-Pak
- Delivers comparable efficiency, pressure drop, and overall performance in half the footprint with a Mini media pack design
- 149 mm – deep filter with the same media area as 292 mm – deep filter
- Space-saving design – reduces storage and handling cost
- Sturdy high impact polystyrene cell sides enclose a fixed media pack
- Fully incinerable
- MERV 13 and higher meet LEED Project Certification efficiency requirements