years
MEGAcel TM
- Pharmaceutical grade eFRM Filtration Technology media is proven to be more durable than microglass, delivering superior performance
- Industry’s first and only eFRM media to be Polyalphaolefin (PAO) compatible, with a higher PAO holding capacity compared to microglass media
- Superior durability and tensile strength, 84 times the pleated strength of microglass
- Chemical-resistant capabilities reduce media degradation in highly corrosive environments
- Exceptional water resistance compared to ultrafine microglass
- One-piece aluminium top with integral duct collar connector
- Lightweight anodised extruded aluminium body
- Individually tested for certified performance
Share this:
Description
| EN1822 | H13, H14 |
| ISO 29463 | ISO 35 H, ISO 45 H |
| Filter Depth (mm) | 125, 152 |
| Media Type (Standard) | ePTFE |
| Frame Material | Aluminium |
| Separator Style | Hot Melt |
| Faceguard Position | Downstream |
| Inlet Collar (mm) | 250, 300 |
| Antimicrobial Available | No |
| Recommended Final Resistance | 500 Pa |
| Max Operating Temperature | 70ºC |
| Inlet Diffuser | Adjustable Distribution Plate |
| Top Material (Standard) | Galvalume |
| Top Material (Optional) | Aluminium, Stainless Steel |
| Special Size Available | Yes |
or
Enquire Now
Related products
AstroCube
- H14 HEPA S+ Filter with Additional Antivirus & Antimicrobial Protection
Removes up to 99.995% of ultra fine particles, including viruses and microbes, with a 99.9% efficacy rate - Wi-Fi Smart Control
Control your unit anywhere and anytime through our AAF Connect mobile app - PM2.5 & CO2 Display
Visualise your current indoor air quality (IAQ) through real-time monitoring
More Features
- Suitable for indoor application to bring in clean fresh air from outdoor
- Reduce indoor CO2 level
- Optional heat recovery feature to reduce the heat from outdoor and reduce stress - A/C system
- Easy installation & maintenance
- Act as an indoor circulation purifier when fresh air is not needed
- Quick switch operation modes from the LED touch panel
AstroSafe® G-Series Single Filter Housings
- Allows a single filter element (prefilter, HEPA filter or gas adsorber) to be installed in a low CFM ventilation system
- Designed so that housing can be tested in place
- Accommodates various arrangements of inlet and outlet ports
- Filter-to-housing fluid seal is created by means of a continuous knife edge in the housing
